Novexx Solutions ALX 92x, Service Manual, Page: 707 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
18
1126 File creation
Status Faulty Easy-Plug code. A file could not be created. The error may e.g. be
caused by a faulty filename or by too less printer memory.
Measure

Check all used filenames for length, applied characters, etc. Change the
name if faulty.
 Check the printer for enough memory.
 Please read the notes in section Easy-Plug errors  .
1127 File format
Status A file name doesn´t match the (DOS-) filename convention.
Measure

Check all used filenames for length, applied characters, etc. Change the
name if faulty.
1128 File exists
Status Faulty Easy-Plug code. A file is ought to be loaded into the printer memory
via #DF command. The command was used without adding the parameter
"O" for "Overwrite", but a file already exists under the given name.
Measure

Rename one of both files or set the parameter "O".
 Please read the notes in section Easy-Plug errors  .
1130 Float overflow
Status Number of figures is too high for a floating comma variable.
Measure

Switch printer off and then back on again after thirty seconds.

Reduce the number of figures.
1131 Logo cache full
Status A logo or several logos was/were sent which is/are too huge for the logo
buffer.
Measure  Switch printer off and then back on again after thirty seconds.

Reduce the logo size.
1140 Line too long
Status Error during conversion from EPT into BIN: permitted line length exceeded.
Measure  Reduce line length.
1141 Para. incorr. Bl
Status Error during processing of a Bit Image parameter.
Measure

Acknowledge by pressing the on-line button.
1150 Integer overflow
Status Too many figures for an integer variable.
Measure  Switch printer off and then back on again after thirty seconds.
 Reduce the number of figures.