manualshive.com logo in svg

Novexx Solutions ALX 92x, Service Manual, Page: 258 / 824

Share
Download
Novexx Solutions ALX 92x Service Manual Download Page 258

06/16 Rev. 09

SERVICE MANUAL

Service Mechanics

DPM – PEM – ALX 92x

60

Print roller drive belt (PEM)

Tools

2 and 5 mm allen keys

Dismantling

 1. Dismantle belt tightener [95A] and roll 

[95B].

 2. Remove print roller.

See chapter 

Print roller (PEM)

 on page 59.

 3. Remove toothed belt.

Toothed belt for feed roller 

(DPM, ALX)

Tools

•

Size 7 and 8 socket wrenches

•

2 mm allen key

•

Small screwdriver

Dismantling

 1. Dismantle the feed motor.

See chapter 

Feed motor (DPM, ALX)

 on 

page 48.

 2. Dismantle the braking mechanism inclu-

ding the washer disc from the brake roller.

See chapter 

Brake roller (type 1 - DPM, 

ALX)

 on page 51.

 3. Remove locking ring [[117B] and take off 

the lever[117A].

 4. Take off the toothed belt.

Assembly

To assemble the device, follow the steps in 
the reverse order.

[116] Print roller drive belt of the PEM (LH

A

belt tightener

B

Roll

A

B

C

[117] The lever (A) in front of the belt must be removed.

A

B

C

Summary of Contents for ALX 92x

























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments