Novexx Solutions ALX 92x, Service Manual, Page: 257 / 824

06/16 Rev. 09 SERVICE MANUAL Service Mechanics
DPM – PEM – ALX 92x
59
Print roller (PEM)
Tools
•
2 mm allen key
Dismantling
1. Remove the locking plate [91A]..
2. Loosen both set screws [114A] at the print
roller coupling.
3. Pull the print roller out of the coupling
[115A] and remove it from the bearing
plate [115B].
Assembly
To assemble the device, follow the steps in
the reverse order. Ensure that:

One of the set screws presses against
the flattening of the print roller axle.
[113] Locking plate (A) on the print roller (PEM LH).
A
[114] Set screws (A, 2x) at the print roller coupling.
A
[115] Removing the print roller.
A
B