Novexx Solutions ALX 92x, Service Manual

Page: 664 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
142
Those data are very helpful for the technical support for fault diagnosis pur-
poses.
EasyPl. file log
Easy-Plug file log
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6

Only visible, if a memory card is inserted.

Activating this parameter may slow down the label rate. Therefore disable
the function after error analysis.

Activating this parameter may cause error messages, which may be
difficult to understand. Therefore disable the function after error analysis. If
an error occurs, disable the function and restart the printer.
Off The file log function is switched off.
All data
All received data, including immediate commands, are written into the log file.
Interpreter data
All data is written into the log file, which the Easy-Plug interpreter reads out
of the reception spooler. Immediate commands are
not included.
Log files delete
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6

Only visible, if a memory card is inserted.
No (Default setting) No function.
Yes Deletes all log files on the inserted memory card, which fulfil the following
conditions:
•
Filename matches the scheme „EPxxxxxx.log“
xxxxx = number from 1 to 999999, preceding digits filled with „0“. Example:
„EP000001.log“.
•
Location: folder \LOGFILES on memory card
Those conditions are matched by logfiles, which are automatically generated
by
SPECIAL FUNCTION > EasyPl. file log
.
Data blocks del.
Delete data blocks
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6

Only appears, if at least one data block is in the flash memory.
Bxx (Default setting) After calling the parameter, data block number 01 is
displayed:
„B01“: block number 01
„diagnose inf“: name of the data block, is contained in the data block header.
Data blocks del.
B01 diagnose inf