Novexx Solutions ALX 92x, Service Manual

Page: 596 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
74
> OPTIONS
OLV Option
64-xx ALX 92x DPM PEM
Off
OLV-Option is not activated (OLV = Online Verifier).
Serial Com1 Com1 is activated for OLV application.

This setting option is only visible, if Com1 is not activated for any other
option.
Serial Com2
Com2 is activated for OLV application.

This setting option is only visible, if Com2 is not activated for any other
option.
RFID Option
64-xx ALX 92x DPM AP 4.4 AP 5.4 AP 5.6
Off RFID-Option is not activated (RFID = Radio Frequency Identification).
Serial Com1 This setting option is not relevant for application of the RFID option.

This setting option is only visible, if Com1 is not activated for any other
option.
Serial Com 3 4 Com 3 4 is activated for application of the RFID option (Setting for
AP 5.4 AP 5.4 Gen II, AP 5.6 64-xx Gen 3, DPM Gen 3, ALX 92x Gen 3 ).

This setting option is only visible, if Com 3 4 is not activated for any other
option.
StandAlone Input
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Defines an interface for data input in standalone mode.

Interfaces are only selectable, if installed and not used by another
function (e. g. as data interface). If
INTERFACE PARA >EASYPLUGINTERPR >
Interface
= „Automatic“, all interfaces besides Com3 are blanked out.
None No data input via interface.
Serial Com1
Com1 is activated for data input in standalone mode.
Serial Com2
Com2 is activated for data input in standalone mode.
Serial Com3 Com3 is activated for data input in standalone mode.
TCP/IP SOCKET Ethernet interface is activated for data input in standalone mode.