S21 CAFFITALY QUICK START GUIDE:
For more information, tips and video
tutorials please visit our website:
www.caffitalysystem.com.au
Diagram 1
Tea Button -
120ml (Blue)
(Tea & Hot Water ONLY)
Single Espresso Button
30ml (White)
Double Espresso Button
60ml (White)
Indicator Light
(Orange=Descale | Red=Check System)
Plug in
appliance.
Switch the
machine
ON
using the
On/
Off Switch
.
2.
Fill the
Water
Tank
with fresh,
still water (either
by filling through
the Water Tank
cover or removing
the Tank).
1.
ON
10.
When all the
button lights
remain steadily
lit, rinse by
pressing the
Tea
button
. Press
again to repeat
rinse cycle.
Raise the
Lever
to open the
Capsule
Compartment
and eject the
Rinse Capsule
.
11.
8.
7.
Place a large
empty container
(at least 250 ml)
under the
Coffee
Dispensing Spout
.
Press the
Double
Espresso button
.
Water will be cycled
through the system.
(This will take about
30 sec.) When done
the
Red Indicator
Light
will switch off.
9.
NOTE:
If the
Red
Indicator Light
continues to blink
and no water has
been extracted,
repeat
Step 8
.
After
Step 8
has
successfully been
completed, all the
button lights will
continue to blink, the
machine is warming
up. (This will take
about 1 min.)
i.
ONLY USE WITH
Caffitaly System
Capsules
12.
Pull drawer forward
and empty any
water and the
Rinse
Capsule
from the
Used Capsule
Drawer
.
Retain the
Rinse Capsule for
future use.
The
Rinse Capsule
can be used
several times when
conducting rinses
(cycling water
through the system)
or for Descaling.
i.
Raise the
Lever
to eject the used
capsule into the
Used Capsule
Drawer
.
Close the
Lever
again fully.
Cycle water
through the
system by pressing
the
Double
Espresso
button
after dispensing a
coffee or other
hot beverage.
17.
18.
16.
The selected
beverage button will
blink and machine
will stop dispensing
on reaching the
programmed
quantity.
Press and release
the button
corresponding
to the type of
beverage you
want as per
Diagram 1
above.
15.
Raise the
Lever
to
open the
Capsule
Compartment
and insert the
capsule, pressing
it gently into place.
13.
Close the
Lever
fully and place
a cup or mug
under the
Coffee
Dispensing
Spout
.
14.
FIRST TIME USE
TIP:
The quantities of beverage dispensed can be programmed. Please refer
to chapter “Programming the quantity of coffee in a cup” in your Manual.
6.
Insert the
Rinse
Capsule
into
the
Capsule
Compartment
.
Close the
Lever
fully.
5.
4.
Raise the
Lever
to open the
Capsule
Compartment
.
3.
Along with the
button lights,
the
Indicator
Light
will also
alternately blink
RED
.
Rinse Capsule
