Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
40
Ⅰ
Programming
Fig. 2-9 Modifying the coordinates mode
In Edit and Auto mode, a sole T word in executing tool offset (it is not with the motion command
in the same block) is relative to No.004 BIT3 setting (as Fig.2-8 and Fig.2-9). When No.003 Bit4=1
and a sole T command is executed, the tool offset number is displayed in poor, which is cleared
out(tool offset number is still displayed in poor when tool offset is not executed for one axis, the
previous bit of tool offset number is for X axis tool compensation and the next one is for Z axis tool
compensation) after executing tool offset.
Example: When No.003 Bit4 is 1 and a sole T0101 is executed, the system displays after
executing Z axis as follows:
Executing a sole T0101 and tool offsets of two axes are not executed
State of T
T0100
Coordinates
displaying
(Incremental
coordinates)
U: 0.000
W: 0.000
(Absolute
coordinates)
X: 0.000
Z: 0.000
№
01 tool
without the tool
compensation
State of T
T0202
Coordinates
displaying
(Incremental
coordinates)
U: 0.000
W: 0.000
(Absolute
coordinates)
X: -12.000
Z: 23.000
Change
№
2 tool
and execute its
offset by modifying
the coordinates
State of T
T0303
Coordinates
displaying
(Incremental
coordinates)
U: 0.000
W: 0.000
(Absolute
coordinates)
X: -24.560
Z: -13.452
Change
№
3 tool
and execute its
offset by
modifying the
coordinates
