Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 3 Manual Operation
239
Ⅱ
Operation
CHAPTER 3 MANUAL OPERATION
Press
key, it enters Manual mode. In the mode, the system can perform the manual feed,
spindle control, override adjustment, tool change etc..
3.1 Coordinate Axis Move
In Manual mode, 2 coordinate axes can perform manual feeding and rapid traverse.
3.1.1 Manual Feed
Press
or
in
and X feeds negatively or positively, and its
feeding stops if the key is released; press
or
and Z axis feeds negatively or positively,
and its feeding stops if the key is released; press
or
, and Y feeds negatively or
positively, and its feeding stops if the key is released; press
or
and the 4
th
axis feeds
negatively or positively, and its feeding stops if the key is released; press
or
and the 5th
axis feeds negatively or positively, and its feeding stops if the key is released.
In Manual mode, press
key to make the indicator enter the manual rapid traverse mode.
3.1.2 Manual Rapid Traverse
Press
in
and the key indicator is ON; press
or
and X
Note!
The key functions of this GSK980TDi machine panel are defined by PLC
program (ladders), please refer to the manual from the machine builder for their
function significance.
Please note that the following functions for the machine panel keys are
described based on the GSK980TDi standard PLC programs!
