Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
350
Ⅱ
Operation
Hereby, the user can select the required receiving files from CNC including part programs, tool
compensation (TOFF.CMP), pitch compensation (WOFF.WMP), parameters (PARA.PAR). The part
programs which can be altered are saved to the file name of the CNC. Move the cursor to the part
program required to alter its program name, double-click the left key to pop up a dialog box as Fig. A,
and the file which can be altered is saved the file name of the CNC (as Fig. B).
Fig. A Fig. B
Select the required file to the CNC and confirm the saved file name, then press [start sending],
and the file is started to send to the CNC as follows:
When a file name in the CNC is the same that of the transmitting, a dialog box is popped up to
select the covering, skipping the file or cancelling transmission as follows:
