Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
218
Ⅱ
Operation
In this mode, rotating the MPG can control program’s execution speed, which can check whether
the machining program is correct.
1.3 Display Interface
The chapter introduces page switch, relationship between operation input and soft key, and
concrete operation methods.
GSK980TDi has 9 function keys including POS, PRG, SET, etc. on its edit keyboard. Each
function key corresponds to one interface which has many pages and operation soft keys, which are
shown below:
1.3.1 POS Interface
Press
to enter POS interface which includes pages
,
,
,
and
, and these pages can be viewed by corresponding soft function key or
repetitively press
.
1) ABSOLUTE POS display interface
The X, Z coordinates displayed are the absolute position of the tool in current workpiece
coordinate system, these coordinates are memorized as power is down and the workpiece coordinate
system is specified by G50.
