Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
266
Ⅱ
Operation
4) Perform the cutting-in direction selection on this page (Partial commands are regardless of the
cutting-in direction selection, but enter to the next page directly); enter to the next page by
soft
button; refer to the following figure:
5) Input the parameter numerical value in this page, the figure at the left is the machining schematic;
the command parameter input frame is at the upper right coner; the command parameter to be input
can be selected by
,
,
or
button. When the command parameter is selected
the left machining schematic, the corresponding address may display with red color; the numerical
value then can be written into the input frame by its corresponding number buttons; write the
numerical value to the input frame by
. The input frame (Only the G71, G72 or G73 owns the
accuracy-machining block input frame) at the lower right corner is the one for inputting the
accuracy-machining block. The cursor can be shifted between the command parameter input frame
and the one of the accuracy-machining block by
or
soft button. A new program is then
created by
soft button after inputting data; refer to the following figure:
