Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
438
Ⅲ
Connection
1 9 5 SSPD PLCS ***
***
RPOS
SRV CSREF RCS
Bit7 1:series spindle controllable function enabled (series spindle The slave ID number of the
spindle 1~3 is 11~13) , it is necessary to restart
；
0: Series spindle controllable function disabled (analogy spindle), it is necessary to restart.
Bit6 1:PLC spindle rotation speed function of each axis enabled
；
0:PLC spindle rotation speed function of each axis disabled
。
Bit3 1:Spindle position function is valid (When it is enabled, the spindle will perform mechanical
releasing/clamping interlocking operation before/after positioning);
0:Spindle position function is invalid.
Bit2 1:Servo motor spindle function is valid ,power on
；
0:Servo motor spindle function is invalid ,power on
。
Bit1 1: Change to position mode,the axis do return REF.
0: Change to position mode, the axis doesn’t return REF.
Bit0 1: Cs function of spindle valid ,power on
0: Cs function of spindle is: invalid, power on
1 9 6 ***
***
*** MSEN
*** *** *** ***
Bit4 1: The multiple spindle control is enabled
0: The multiple spindle control is disabled
2 0 1 SNTP *** *** ECN HBR
ERV ***
***
Bit7 1:Synchronization mode follow
0:Synchronization mode interpolation
Bi4 1:Whether the G81 synchronization command can be specified in the synchronization
process allow
0:Whether the G81 synchronization command can be specified in the synchronization
process prohibition
Bit3 1:The system resets in the synchronization process reserve the synchronized control
0:The system resets in the synchronization process cancel the synchronization control
Bit2 1:In the synchronization procedure,in the G99 feed per revolution use the theoretical
revolving speed of workpiece\
0:In the synchronization procedure,in the G99 feed per revolution use the encoder feedback
revolving speed
2 0 2
CTHDN
OENC
AAC *** ***
AOT
*** ***
EXTRA
IO
Bit7 1:Circular screw interpolation adopts C axis interpolation mode.
0:Circular screw interpolation adopts follow spindle mode..
Bit6 1:Slope axis control enabled
0:Slope axis control disabled
Bit3 1:The soft-limit parameter of the slope axis sets to 0/1 when its axis control is enabled the
coordinate value under the rectangular coordinate system\
0:The soft-limit parameter of the slope axis sets to 0/1 when its axis control is enabled the
coordinate value under the slope coordinate system.
Bit0 1:Extended I/O unit linked is valid
0:Extended I/O unit linked is invalid\
