Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 6 Program Edit & Management
273
Ⅱ
Operation
3) Input the program number in the pop-up dialogue box. For example, search O0001 program
(the leading zero can be omitted when the program name is input) and the display is shown
below:
4) Press
（
or
,
,
）
, the searched program will be displayed. If the program
does not exist, the CNC prompts “File does not exist”.
Note: Press
or
to search programs in Edit mode. When there is no program, the CNC
automatically creates programs; press
or
to execute the search, and the CNC prompts
“The file does not exist” when there is not the program.
6.3.2 Scanning
1) Select Edit or Auto mode;
2) Press
to enter the program display page;
3) Press
;
4) Press
or
to display the next or previous program;
