Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
304
Ⅱ
Operation
8.1.2 Measure Input
CNC automatically calculates the data such as the cutter compensation or zero offset, etc. when
using the measure input, so that the input data becomes the absolute coordinate of the new
coordinate system at the machine’s current position.
Method 1: Press
or
Move the cursor to the inputted position, input the coordinate
value after pressing the
soft button
，
the CNC will automatically calculate to input the data by
controlling the
button;
Method 2: Move the cursor to the selected coordinate system by pressing
or
, key
the coordinate value by address button
or
; CNC automatically calculates and then inputs
the data by
;
Note: The input data from measure will become the absolute coordinate of which the current point locates at
the setting coordinate system, for example:
System executes G54 command, input X100; Z100 in G54 coordinate system by measure input method.
CNC automatically calculates the G54 offset value, so that the absolute coordinate at the current position will
become X100; Z100.
8.1.3 Machine Tool Coordinate Record
Enter to the workpiece coordinate system setting page, move the cursor to the inputted position
by
or
; directly input the machine tool coordinate by
soft button.
8.2 Coordinate System Modification
Enter to the workpiece coordinate system setting page
，
press
、
,move the cursor to the
data position to be modified; input the incremental value by the
soft button
，
press
，
add the current workpiece coordinate system offset value and the inputted incremental value, and its
result will show as a new workpiece coordinate system offset value.
