Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
284
Ⅱ
Operation
、
: Insert the current absolute coordinate (original value input state) or the sum (offset
input state) of the absolute coordinate and offset value input for the corresponding axis at
the cursor position.
: Shift the system to the retyping offset value when the absolute coordinate value along
each axis is inserted; simultaneously, it becomes
after controlling this button.
: Shift the system to state that only the absolute coordinate along each axis can be inserted;
simultaneously, it becomes
after controlling this button.
: Retreat from Teaching mode.
6.12 Other Operations Available in Edit Mode
The operations by this GSK980TDi machine panel allowed in Edit mode are defined by ladders,
please refer to the materials by the machine builder.
Please note that the following functions are described based on the 980TDi standard PLC
programs!
1) Spindle override can be adjusted by pressing
,
;
2) Feedrate override can be adjusted by pressing
,
，
;
3) CNC can be reset by pressing
key;
4) The operation mode is switched by pressing any of the keys among
,
,
,
,
or
;
5) The data transmission
6) Refer to II OPERATION, Chapter 12
7) Cooling
control
Refer to II Operation, Section 3.2.3
8) Lubricating
control
