Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
336
Ⅱ
Operation
4) Altering often used parameter
Parameters can be altered directly in the often used parameter page. Its alteration
method is the same that of state parameter and data parameter. Its value is also refreshed
in the state parameter or data parameter page.
11.5 Macro Variable Note
Macro variable note display is mainly administrated for the macro note and macro note file. The
administration of the macro note file includes the leading-in, leading-out, rename, overloading and
remark, etc. of the macro note file.
11.5.1 Macro Variable Note Page
Press the
soft button to enter its corresponding customization page ,after entering the
cutter compensation page by controlling the
button, The page is shown below:
The overloaded file data can be set on the “Custom macro variable” page, only 4 and above
operation authorities can be performed.
11.5.2 Note List
Press the
button to enter the macro variable note list after entering the macro variable
note page.
