Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
246
Ⅱ
Operation
4.1.2 Moving Direction Selection
Pressing
or
key once can move X negatively or positively by a step increment;
pressing
or
key once can move Z negatively or positively by a step increment; pressing
or
key once can move Y negatively or positively by a step increment.
4.2 MPG Feed
Set the BIT3 of the system parameter No.001 to 1, and press
key to enter the MPG mode,
it displays as follows:
The MPG figure is shown as follows:
The handwheel (MPG) figure
