Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 11 Data Setting
333
Ⅱ
Operation
11.4.2 Data Parameter, Pitch Compensation
1) Turn on the parameter switch;
2) Enter the MDI mode;
3) Move the cursor to the No. of the parameter to be set;
4) Key in the new parameter value;
5) Press
key, the value is entered and displayed;
6) After all parameters setting is finished, the PARM SWT needs to be set to OFF for security.
Explanation: The screw-pitch parameter can only be altered under the 2 level password authority.
Example 1: set the data parameter No.027 to 7600.
Move the cursor to No.027 by the steps above, key in 7600 by sequence as follows:
Press
to finish the alteration. The display is shown below:
