Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 6 Program Edit & Management
261
Ⅱ
Operation
Note 1: In the Insert mode, if the cursor is not located at the row head, a space will be automatically
generated when inserting the code address; if the cursor is located at the row head, the space will
not be generated, and it should be inserted manually.
Note 2: In the Insert mode, if the previous bit before the cursor is a decimal point and the cursor is not
located at the row end, input an address word, the “space” will be added automatically following the
decimal point.
6.1.5 Deleting a Character
Steps:
1) Press
to enter PRG CONTENT page in Edit mode;
2) Press
key to delete the character before the cursor; press
key to delete the
character where the cursor locates.
6.1.6 Altering a Character
There are 2 methods for the character alteration:
Insertion:
First delete the character altered by the methods in Section 6.1.5, then insert the
character required by the methods in Section 6.1.5 of this part.
Direct alteration:
1) Select the PRG CONTENT page in Edit mode;
2) Press
key to enter the ALT state (the cursor is a backlight rectangle, and the
“Modification” shows at the tile column), the display page is as follows:
