Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 6 Program Edit & Management
269
Ⅱ
Operation
program content page
，
press
soft key
，
enter to the program content page
，
press
soft
button to open the macro edit function menu, which is shown below:
In this case, automatically enter to the macro edit state, some special characters, such as ([,],
＝
,
＞
,
＜
,
＋
and
＊
) can be input. The macro program command can be inserted by the function button
at the right side, so that the macro edit is more simple and enabled
Note: In the macro program edit state, program index or scan operation is unavailable.
6.1.13 Creating & Modifying a Program Annotation
GSK980TDi can add annotation to each line, and its steps are shown below:
1) Select Edit mode, press
to enter program interface and switch enter the program
content page;
2) Press
and the CNC automatically insert “( )” into the end of line where the cursor
is, and the display page is shown below:
3) Input annotation character into “( ). For example, input “KUAI” character string, and the
display page is shown below:
