Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
276
Ⅱ
Operation
2) Press
to input a new program name;
3) Press
.
Method 2:
1) Select Edit mode, press
to enter the program interface, and in necessity press
to enter the local directory page:
2) Move the cursor to the program which is to be modified, press
and input a new
program name in the pop-up diaglog box, and at last press
.
Note: the method 1 is only used to the current program, and the method 2 is used to any programs.
6.7 Program Management
Press
,and then press
to enter the local program display page. In the page, it
lists the program names saved in CNC system, and it can display up to 15 names in a page. When
the saved exceed 15 programs, it may press
or
to display the next page.
