GSK 980TDi, User Manual

Page: 144 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
128
Ⅰ
Programming
of Z coordinate between it and A
n
is Δ d);
Cutting end point: It is defined by X(U) Z(W) , and is defined with B
f
of the last radial
tool infeed.
R(e) : It is the tool retraction clearance after each radial(X) tool infeed, its range is 0~99.999 (unit:
mm, radius value) without sign symbols. The specified value is reserved validly after R(e)
is executed and the data is switched and saved to No.056. NO.056 value is regarded as
the tool retraction clearance when R(e) is not input.
X: X absolute coordinate value of cutting end point B
f
(unit: mm).
U: Different value of X absolute coordinate between cutting end point B
f
and starting point.
Z: Z absolute coordinate value of cutting end point B
f
(unit: mm).
W: Different value of Z absolute coordinate between cutting end point B
f
and starting point A(unit:
mm).
P( Δ i) : Radial(X) discontinuous tool infeed of each axial cutting cycle, its range: 0
＜
Δ i ≤ 9999999
(IS_B)/ 0
＜
Δ k ≤ 99999999
（
IS_C
）
(unit: least input increment, without sign symbol).
Q( Δ k) : Axial(Z) discontinuous tool infeed of each radial cutting cycle, its range: 0 ＜ Δ k ≤
9999999(IS_B)/0
＜
Δ k ≤ 99999999
（
IS_C
）
(unit: least input increment, without sign
symbol)..
R( Δ d)
：
Axial (Z) tool retraction clearance after cutting to end point of radial cutting, its range:
0~99999999×least input increment (unit: mm/inch, without sign symbol).
The system defaults the tool retraction clearance is 0 after the radial cutting end point is
completed when R (
Δ d) is omitted.
The system defaults it executes the positive tool retraction when Z(W) and Q( Δ k) are
omitted.