Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
258
Ⅱ
Operation
cursor locates is over the total columns of the next row, the cursor moves to the next block end (at “;”
sign) after the
key is pressed;
4
）
Press
key, the cursor shifts a column to the right; if the cursor locates at the row end,
it moves to the head of the next block;
5
）
Press
key, the cursor shifts a column to the left; if the cursor locates at the row head,
it moves to the end of the next block;
6
）
Press
key to window upward, the cursor moves to the 1
st
row and 1
st
column of the
previous window, if it windows to the head of the program, the cursor moves to the 2
nd
row and 1
st
column;
7
）
Press
key to window downward, the cursor moves to the 1st row and 1st column of
the next window, if it windows to the end of the program, the cursor moves to the last row and 1st
column of the program;
2. Finding: To search for the specified character upward or downward from the cursor
current location
The steps of finding is as follows:
1) Press
to enter Edit mode, and press
key to enter the PRG CONTENT window;
2) Press
, and input the required characters to be searched(can input one block). For
example, finding “G00” page is shown below:
4) Press
key (
or
is determined by the location of the character searched to the
character where the cursor locates), it displays as follows:
