Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
298
Ⅱ
Operation
3) Manually move the tool-post at the side of + X of the workpiece, and the optimized position of
the impact will not occur when the tool-change executes at this side; record the X axis coordinate
at this position by pressing the
; refer to the following figure:
4) Manually move the tool-post at the side of + Z on the surface of the workpiece, and the
optimized position of the impact will not occur when the tool-change executes at this side; record
the Z axis coordinate at this position by pressing the
; refer to the following figure:
In the above-mentioned interface, shift the interface or press the
, automatically conceal
the small window of “Tool-change safety point setting”, this area recovers and displays the small
