Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 4 MPG/Step Operation
245
Ⅱ
Operation
CHAPTER 4 MPG/STEP OPERATION
In MPG/Step mode, the machine moves by a specified increment.
4.1 Step Feed
Set the system parameter No.001 Bit3 to 0, and press
key to enter the STEP working
mode, it displays as follows:
4.1.1 Increment Selection
Press
to select the move increment, the increment will be shown in the
page. When the BIT7(SINC) of K016 is 1,
step width value is inactive; when the BIT7 is 0,
are all active. For example, to press
key, the window is shown as
follows:
Note!
The key functions of this GSK980TDi machine panel are defined by PLC
program (ladders), please refer to the manuals by the machine builder for their
significance.
Please note that the following description for the key functions in this chapter
is based on the GSK980TDi standard PLC program!
