Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 3 G Commands
185
Ⅰ
Programming
No.22 as 8000.
N23 P5 W#104
；
Set the 5
th
axis of the axle type data parameter No.23 to the
value of the macro variable
＃
104
N37 P1 R#102
；
Read the 1
st
axis parameter value of the axle type data
parameter No.37 to the macro variable
＃
102.
N37 P3 W8000
；
Set the 3
rd
axis parameter of the spindle data parameter No.37
as 8000.
N38 P2 W#105
；
Set the 5
th
axis of the spindle data parameter No.38 to the
value of the macro variable
＃
105
G11
；
Cacnel the read or write method of the parameter.
Note: The read/write programming method of the K parameter is consistent with the one of the
system state parameter; The read/write programming method of the D/DT/DC parameters are
coincident with the one of the system data parameter.
