Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 1 Operation Mode and Display Interface
213
Ⅱ
Operation
Press key
Name
Function
Window key
Switch the page in the same display page
1.1.3 Menu Display
Menu key
Remark
To enter Position interface including RELATIVE POS, ABSOLUTE POS, POS &
PRG, INTEGRATED POS, MPG interrupted page.
z
“ABSOLUTE POS” page can display the current absolute coordinates, clear
out machining count, machining time, as well, it can be set the Max. workpiece
number, current number, and the tool-change safety position;
z
“POS & PRG” page can display current coordinate information and current run
program;
z
“RELATIVE POS” page can display current relative coordinates, clear relative
coordinates;
z
“INTEGRATED POS” can display current coordinate information; the
reference position along each axis can be set under the 2
nd
level authority;
z
The input/output equivelant amount along each axis can be displayed based
upon the MPG interruption on its MPG interruption page, which can be
eliminated the interruption amount along each axis.
To enter Program interface including program content, program list, Marco variable
note, program state page
z
Edit/search current open programs in program content page;
z
Edit MDI programs, display coordinates, override and modal state in MDI
page;
z
Display, preview, open, copy machining programs in CNC in local catalog
page;
z
The noted macro variable note name can be viewed on the macro variable
note page;
z
Display, preview, open and copy machining programs in U disk in U disk
catalog page
Enter tool offset interface including offset setting, macro variables, workpiece
coordinate system and tool life page
z
Set/search tool offset value and wear value in tool offset setting page;
z
Set/search CNC macro variables in macro variable page;
z
Set/search
G54
～
G59 coordinate system and zero offset value in workpiece
coordinate system page;
z
Set/search use information of current tool life
Enter alarm interface including alarm information, alarm log page
z
Search CNC alarm, CNC warning, PLC alarm, PLC warning, servo alrm, in
alarm information page; the caused reason and troubleshootings can be
viewed by selecting some one alarm or precaution;
z
Display alarm/warning history record in alarm log page
