Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 6 Program Edit & Management
255
Ⅱ
Operation
CHAPTER 6 PROGRAM EDIT & MANAGEMENT
In Edit mode, a program can be created, selected, altered, copied and deleted, and the
bidirectional communication of CNC to CNC, or CNC to PC can also be done.
To prevent the program to be altered or deleted accidentally, a program switch is set up for this
GSK980TDi system. And it must be turned on before program editing. Please see details in Section
10.1.1 of the part.
The system provides multi-level user permission to facilitate the management. More than 4 levels
(4 level, 3 level) can open the program switch to edit programs. See
OPERATION, Section 10.1.2 .
6.1 Program Creation
6.1.1 Creating a Block Number
In the program, a block number can be added or not, the program is executed by the sequence.
When the “AUTO SEG” switch in SWITCH SETTING window is OFF, CNC doesn’t generate the block
number automatically, but the blocks may be numbered manually.
When the “AUTO SEG” switch in SWITCH SETTING window is ON, CNC generates the block
number automatically, it automatically generates the next block number by pressing
or
in editing. The block number increment is set by the CNC data parameter No.042. (See details in
Section 10.1.1
of this part.)
6.1.2 Inputting a Program
Press
to enter the Edit mode. Press
to enter the Program interface, create a
machining program before inputting a machining program. The creating method is shown below:
Method 1:
1
）
Press address key
, number key
,
,
and
key by sequence (e.g.
taking an example of creating program O0001, the leading 0 can be omitted when its name is
input). Its display is shown below:
