Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
324
Ⅱ
Operation
11.1.2 Level Setting
To prevent programs, CNC parameters from being modified at will, GSK980TDi provides the
level setting function, and its password grade is divided into five, from high to low grade: 2
nd
grade
(machine manufacturer), 3
rd
grade (device management), 4
th
grade (engineer), 5
th
grade (machining
operation), 6
th
grade(operation limit). The current operation grade is displayed in “Current Level:_” in
the level setting page.
2
nd
grade
：
it is for the machine manufacturer, which permits the machine manufacturer to alter the
state parameters, data parameters, pitch compensation data, tool compensation data, to edit
programs, to transmit PLC and so on.
3
rd
grade: it permits to alter state parameters, data parameters, tool compensation data and to edit
programs.
4
th
grade: it permits to alter tool compensation data (tool-setting operation), macro variables, to edit
programs, but not to alter state parameters, data parameters and pitch compensation data.
5
th
grade: it permits to alter tool compensation data, not to select and edit programs, and not to alter
state programs, data programs and pitch compensation data.
6
th
grade: it has no level to operate only the machine operation panel, not to alter tool compensation
data, not select and edit programs, not to alter state parameters, data parameter and pitch
compensation data.
1) Operation grade entry
a) Move the cursor to the line “INPUT PASSWORD” in the CNC setting page;
b) Input the operation password(the system displays one “*” as soon as a number is input;
c) Press
and the operator can enter the corresponding grade operation;
d) After the operator enters the corresponding operation grade page, the prompt column
prompts the system’s current grade, and the corresponding operations as follows:
Note 1: The defined password length corresponds to the operation grade, and the user cannot increase
or reduce the length at will, which is shown below:
Operation
grade
Length
Initial
password
3
rd
grade
5 digits
12345
4
th
grade
4 digits
1234
5
th
grade
3 digits
123
6
th
grade
None
None
