Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
262
Ⅱ
Operation
3) Input the modified character(as the above figure, alter X300 to X250, input
,
,
), it displays as follows:
Note : In ALTER state, the current character where the cursor locates is altered for the input one, and the
cursor moves a byte forward;
6.1.7 Deleting a Single Block
Single block deletion:
1) Press
in Edit mode to enter program interface, and switch program content page.
2) Move the cursor to the head of the block to be deleted, then press
key.
Multi-block deletion:
1) Select the edit operation mode, enter to the program page set by
button, and then shift
to the program content page;
2) Move the cursor to the beginning of the block to be deleted, press the
soft button, and
then move the selected block by cursor, the page is as follows:
