Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
292
Ⅱ
Operation
Example: After machine zero returning, when the absolute coordinate of the tool in workpiece
coordinate system is (a,b), the setting value of system parameter No.047 should be close
to a,b.
7.4 Coordinates Record
When the trail-cut tool-setting or machine zero return tool-setting is executed, the coordinates
record function can be used to get the convenient tool-setting operation.
When the tool-setting is executed and after the tool cuts along X (or Z), the following steps are
executed to directly move the tool to the safety position as follows:
1) Press
to enter the tool offset interface, and then press
to enter the tool
offset page as follows:
2) Press
and
, absolute corrdinates of X and Z
(
without including current tool offset
values
)
are recorded in the CNC. After the absolute values are recorded correctly, there is a
flash “Record coordinates” in the upper of the screen, and there is a prompt “Current X
、
Z
Absolute coordinates have been recorded” in the bottom of the screen as follows:
3) Retract the tool to the safety position, and stop the spindle. When the diameter is measured
for the outer circle and the distance from the reference plane to it is done, the measured