Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 1 Programming
3
Ⅰ
Programming
CHAPTER 1 PROGRAMMING
1.1 GSK980TDi Introduction
1.1.1 Product Introduction
Being upgraded product of GSK980TDi, GSK980TDi CNC turning is the better choice.
The updated development GSK980TDi Turning Machine CNC System made by GSK CNC
EQUIPMENT CO., LTD. is the new product based upon the GSK980TDi updated software/hardware,
which owns the vertical and horizontal structures. GSK980TDi uses the GSKLINK bus technology,
matches with the 17bit absolute encoder, carries out the automatic recovery of the system power-on,
no-block mechanical zero return, servo parameter on-line modification or servo state on-line
diagnosis, etc.
.
GSK980TDi GSK980TDi-V
5 feed axes
，
2 analogy spindle
control precision 0.1
μ
m
，
Max. speed 120m/min
GSK980TDi standard configuration with GS2000T-LA1 series strong overloading servo unit, it
is used the GSKLINK bus technology, matched with 17Bit absolute encoder
The spindle orientation can be carried out by adapting the servo spindle, Rigid tapping,
Cylindrical Interpolation or Polar Coordinate Interpolation.
Used the GSKLINK bus technology
，
carried out the functions such as the power-on
automatically recover of the coordinate system, Non-block mechanical zero return, Servo
parameter on-line modification and servo state on-line diagnosis, etc.
Built-in multi PLC programs
，
PLC ladder on-line display and real time monitor, as well the
series I/O unit.
It owns the MPG trial cutting, Teachine, MPG interruption functions.
It owns the functions, such as the on-line machine tool debugging guide, miscellaneous
programming, diagram dimension directly input and polygon turning, etc.
MDI multi-block performance
64M program store space, 10000 components program, and support the U disk program
