Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 13 Communication
351
Ⅱ
Operation
When the part program name is the same that of the transmitted file, the covering cannot be
done, otherwise, the system pops up the wrong prompt as follows:
13.1.5 Part Program Management
Select the current project file, then click [Manage Part Programs] in the menu [Communication] ,
and the part programs in the CNC are managed. The system pops up a dialog box to manage part
programs in the CNC as follows:
Press [Delete File] and the selected part programs are deleted in the CNC after the required
programs are selected.
Note: The program being used in the CNC cannot be deleted.
