Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 11 Data Setting
325
Ⅱ
Operation
Note 2: When the operation level is less than or equal to the 3
rd
grade ( 3
rd
, 4
th
, 5
th
or 6
th
grade) and the
system is turned on again, the operation level does not change. When the level is the 2
nd
grade and the
system is turned on again, the operation level defaults to the 3
rd
grade.
2) Password
modification
Steps:
a) The operator enters the grade to alter the password according to the method “Operation
grade entry” after the system enters the setting page;
b) Press
the
soft button or manually move the cursor; Move the cursor to the line
“ALATER PASSWORD”;
c) Input the new password, and then press
;
d) The CNC prompts “ Input the new password again”;
e) Input the new password again and then press
. When the two input passwords are
identical, the CNC prompts “Password has been altered, please save the new
password.” The password alteration is done successfully.
Note: The system prompts, “The new password is not identical with the confirmation” when the two
input passwords are not identical. At the moment, input the new password again.
3) Operation grade degradation
The degradation is to degrade from the high to the low, and its steps are shown below:
a) Input the password according the method of “Operation grade entry” after the system
enters the setting page;
b) Press
soft key, Move the cursor to the line “CURRENT LEVEL” and the system
pops up
as follows:
c) Press
（
or
）
, and the CNC prompts “Password degrades one grade” as
follows:
