Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK980TDi Turning CNC System User Manual
280
Ⅱ
Operation
The drawing can be temporarily stopped by
soft button (or
button) during the
diagram;
In the process of the path preview, when the path exceeds its range, the diagram can be
displayed at the middle of the screen by
soft button (or
).
The current diagram path can be eliminated by
soft button (or
).
2) Drawing speed selection
Enter to the next soft function menu by
; the drawing speed can be controlled by
,
,
or
(The corresponding shortcut buttons are
,
,
or
); the
speed can be overridden with real-time during the drawing.
3) Scaling up/down of path
In the path preview page, the scaling up/down of the diagram path with real-time can be
performed by
soft button (or
),
soft button (or
). The diagram path can be
zoomed in
2
times by the
; the diagram path can be zoomed out
2
/
1
times by
, as
well the current scaling shows at its corresponding prompt column.
4) The displayed movement of diagram path
The diagram path movement can be carried out by cursor movement button in the path display
page. The movement interval can be adjusted by
soft button (or
); the current movement
interval is then displayed at its corresponding prompt column.
5) Mirror image path
In the path preview page, the programming path and symmetric line of the programming path
(cutting command) will display by
; refer to the following figure:
