Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 4 Tool Nose Radius Compensation(G41,G42)
189
Ⅰ
Programming
coordinate system is as Fig. 4-7; T1
～
T8 in front tool post coordinate system is as Fig. 4-8. The tool
nose center and starting point for T0 and T9 are shown in Fig. 4-9.
Z axis
X axis
Imaginary tool
nose No.1
Imaginary tool
nose No. 2
Imaginary tool
nose No.3
Imaginary tool
nose No.4
Imaginary tool
nose No.5
Imaginary tool
nose No.6
Imaginary tool
nose No.7
Imaginary tool
nose No. 8
Fig. 4-7 Imaginary tool nose number in rear tool post coordinate system
Rear tool post coordinate system
