Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
Chapter 3 Parameters
469
Ⅲ
Connection
0: Direction key should be held on in zero return with direction key unlocked.
Bit1 1:Ref.C mode,the feeding slowdown when press down switch, it moves negatively after
decelerating.
0:Ref.C mode,the feeding slowdown when release switch, it moves negatively after
decelerating.
0 1 2 APRS
***
***
ISOT
Bit7 1: ABSOLUTE automatically set after reference return, the coordinate set by parameter
No.049 and No.050;
0: ABSOLUTE not automatically set after reference return
Bit 0 1: Prior to machine zero return after power-on or E-stop, manual rapid traverse active
0: Prior to machine zero return after power-on or E-stop, manual rapid traverse inactive
0 1 4
*** ***
*** ZRS5
ZRS4
ZRSY ZRSZ
ZRSX
Bit4~0 1: 5
th
, 4
th
, Y, Z, X has machine zero, the system detects DEC signal and zero signal in
executing machine zero return.
0: 5
th
, 4
th
, Y, Z, X has no machine zero, the system does not detect DEC signal and zero
signal and directly executes machine zero return
1 8 3 *** *** ***
MZR5 MZR4 MZRY MZRZ MZRX
Bit4 1: For the 5
th
axis, press
to execute machine zero return
；
0: For the 5
th
axis, press
to execute machine zero return
（
has not defined the press key
in the standard PLC
）
Bit3 1: For the 4
th
axis, press
to execute the machine zero return
；
0: For the 4
th
axis, press
to execute the machine zero return.
Bit2 1: For Y
axis, press
to execute the machine zero return
；
0: For Y
axis, press
to execute the machine zero return.
Bit1 1: For Z axis, press
to execute the machine zero return
；
0: For Z axis, press
to execute the machine zero return.
Bit0 1: For X axis, press
to execute the machine zero return
；
0: For X axis, press
to execute the machine zero return.
1 8 8 *** RRTn
*** *** ***
［
Data type
］
Bit
axis
RRTn 1: when Y, 4
th
, 5
th
are rotary axis, the zero return use D mode;
0: when Y, 4
th
, 5
th
are rotary axis, the zero return use A, B,C mode( need to power-on again).
