manualshive.com logo in svg

Siemens SINAMICS G120, Список руководств

Siemens SINAMICS G120 - мощный преобразователь частоты для промышленных приложений. Скачайте бесплатно руководство пользователя ("List Manual") с официального сайта Siemens для нашего продукта. Узнайте все возможности и функции устройства, чтобы максимально эффективно использовать его в вашем бизнесе.

Поделиться
Скачать
background image

SINAMICS G120 CU250S-2 Control Units
List Manual, 09/2017, A5E33842890 

461

2 Parameters

2.2 List of parameters

Description:

Selects the upper changeover point of the friction characteristic for the frictional torque input controlled by the motor 
model of the induction motor.
The speed of this changeover point is pre-assigned when automatically calculating with the changeover speed 
p1752. The changeover point located below is pre-assigned with the changeover speed p1752 * (1 - p1753).
Example: p3844 = 3 means that the speed value for the change to the monitor model (p3823 = p1752) is entered into 
p3823 (friction characteristic value n3).
Depending on the display of r3840.9, the frictional torque is calculated from the friction characteristic values, which 
are associated with these changeover points. For the changeover of the motor model, with hysteresis, the frictional 
torque smoothed with p3843 changes between these two states.

Dependency:

As part of the automatic calculation (p0340), p3844 is only activated for closed loop control (p1300 = 21, 23) of 
induction motors with encoder.
Refer to: p3843

Notice:

If the changeover point defined using p3844 does not match the changeover speed p1752, then internally, the model-
controlled friction torque input is automatically deactivated (same as for p3844 = 0).

Note:

For p3844 = 0, the model-controlled frictional torque changeover is deactivated. The frictional torque is then 
calculated the same as for the encoderless control by interpolating between the points along the friction 
characteristic.

Description:

Setting for the friction characteristic record.
After the next switch-on command, the friction characteristic is automatically recorded.

Value:

0:

Friction characteristic record deactivated

1:

Friction char record activated for all directions

2:

Friction char record activated for positive direction

3:

Friction char record activated for negative direction

Dependency:

When selecting the friction characteristic measurement, the drive data set changeover is suppressed.
For linear drives (refer to r0108 bit 12) it is not permissible to carry out the friction characteristic measurement for 
mechanical systems that limit travel.

Danger:

For drives with a mechanical system that limit the distance moved, it must be ensured that during recording, the 
friction characteristic is not reached. If this is not the case, then it is not permissible that the measurement is carried 
out.

Notice:

To permanently accept the determined settings they must be saved in a non-volatile fashion (p0971, p0977).

Note:

When the friction characteristic record is active, it is not possible to save the parameters (p0971, p0977).
When the friction characteristic record is active (p3845 > 0), it is not possible to change p3820 ... p3829, p3830 ... 
p3839 and p3842.
When recording the friction characteristic, in addition to the friction, the motor losses are also determined (e.g. iron 
losses, eddy current losses and re-magnetizing losses). A differentiation is not made between these individual loss 
components. We recommend that a motor temperature sensor is used because torque deviations can also be 
emulated/mapped on the characteristic due to the thermal influence.

p3844[0...n]

Friction characteristic number changeover point upper / FricNo chng_pt up

Access level: 

4

Calculated: 

-

Data type: 

Unsigned8

Can be changed:

 U, T

Scaling: 

-

Dyn. index: 

DDS, p0180

Unit group: 

-

Unit selection: 

-

Func. diagram: 

-

Min Max 

Factory 

setting 

0 4 0 

p3845

Friction characteristic record activation / Frict rec act

Access level: 

2

Calculated: 

-

Data type: 

Integer16

Can be changed:

 T

Scaling: 

-

Dyn. index: 

-

Unit group: 

-

Unit selection: 

-

Func. diagram: 

7010

Min Max 

Factory 

setting 

0 3 0 

Содержание SINAMICS G120









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SINAMICS G120

Parker 890 Series Quick Start Manual preview
890 Series
Бренд: Parker Страницы: 30
VAT 110 Series Installation, Operating, & Maintenance Instructions preview
110 Series
Бренд: VAT Страницы: 22
Panasonic TY-RM50VW Operating Instruction preview
TY-RM50VW
Бренд: Panasonic Страницы: 72
Panasonic CZ-RTC5 Operating Instructions Manual preview
CZ-RTC5
Бренд: Panasonic Страницы: 45
Panasonic CZ-RWSU3 Operating Instructions Manual preview
CZ-RWSU3
Бренд: Panasonic Страницы: 24
Ohsung Electronics B905-FTN-TA User Manual preview
B905-FTN-TA
Бренд: Ohsung Electronics Страницы: 18
ZIMO MX10 Instruction Manual preview
MX10
Бренд: ZIMO Страницы: 38
A10 Harmony Controller 2000 Installation Manual preview
Harmony Controller 2000
Бренд: A10 Страницы: 27
V2 ELETTRONICA PD1 Manual preview
PD1
Бренд: V2 ELETTRONICA Страницы: 72
WAGO 751-3502 Manual preview
751-3502
Бренд: WAGO Страницы: 16
SeaLevel SeaI/O Series User Manual preview
SeaI/O Series
Бренд: SeaLevel Страницы: 115
SMC Networks VTA301 Series Operation Manual preview
VTA301 Series
Бренд: SMC Networks Страницы: 10
Bardac drives T2-ENCOD-IN User Manual preview
T2-ENCOD-IN
Бренд: Bardac drives Страницы: 2
Beckhoff CX8080 Documentation preview
CX8080
Бренд: Beckhoff Страницы: 67
ENTRYPASS EP.MINI Wiring Manual preview
EP.MINI
Бренд: ENTRYPASS Страницы: 27
Omron K8AK-LS Manual preview
K8AK-LS
Бренд: Omron Страницы: 12
QUANT QUANT-14 Operation Manual preview
QUANT-14
Бренд: QUANT Страницы: 24
Samson 46-5 Mounting And Operating Instructions preview
46-5
Бренд: Samson Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды