Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 223 / 999

2-9-(20)
Circle Position Compensation Section 2-9
STEP 1: Setting Measurement Conditions
Select the degree of the characteristic feature in the point extractions to use
for comparison.
The asterisk (*) indicates the default setting.
1. Select Position compensation.
Mode Details
Black * Uses the low density (black) points.
White Uses the high density (white) points.
Black defect Compares the density with surrounding pixels and uses the
point with the largest difference (where the density decreases
suddenly).
White defect Compares the density with surrounding pixels and uses the
point with the largest difference (where the density increases
suddenly).
Edge Compares the density with surrounding pixels and uses the
point with the largest difference (where the density decreases/
increases suddenly).
Set the conditions for detecting
the feature on the circumference.
1.Circle pos. comp
Position compensation
Detailed conditions
Model reference