Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 11 / 999

1-(3)
Operational Flow Section 1-2
1-2 Operational Flow
Preparations
Install the Application Software in the Controller. Refer to 1-3 Installing the
Application Software.
SeeAlso
Refer to 1-6 Basic Operations to learn about the basic operational flow from
setting detection conditions to executing measurements.
Setting Detection Conditions
STEP 1: Make the settings required to input images. Refer to1-6-1 STEP 1:
Settings for Image Input.
STEP 2: Make settings to correct positioning. Refer to 1-6-2 STEP 2: Settings
for Position Displacement Compensation.
STEP 3: Set the actual measurement methods. Refer to 1-6-3 STEP 3: Setting
Measurement Methods.
STEP 4: Make settings to output the results. Refer to 1-6-4 STEP 4: Setting
Results Output Methods.
Confirming Settings and Executing
STEP 5: Perform test measurements and start executing measurements.
Refer to 1-6-5 STEP 5: Start Test or Measurement and to SECTION 3 Monitor
Mode and Run Mode.
Selecting Processing Items that Suit the Application
Refer to SECTION 2 Processing Items Setting Procedures.
Changing and Deleting Settings
Copy, clear, and change units and unit names by refer to
&KDQJLQJWR2WKHU
3URFHVVLQJ,WHPVRQSDJH
.
Saving Settings
1. Save detection conditions. Refer to 1-8 Saving Settings and Shutting
Down.
2. Back up image, system, and scene data. Refer to 4-2 Backing Up Data for
information on how to back up settings.
Application Setting Operations
1. Set conditions by product type. Refer to 4-1 Changing Scenes and Scene
Groups for information on scene and scene-group functions.
2. Set system environment conditions. Refer to SECTION 5 System Settings.
3. Initialize the measurement conditions that have bee set. Refer to 4-1-3 Ini-
tializing Measurement Conditions: Clearing Scenes and 7-1 Set Up Menu.
4. Set communications specifications and I/O format for communications with
external devices. Refer to SECTION 6 Communicating with External De-
vices.
Additional Functions
1. Use Memory Cards if required. Refer to 4-6 Memory Card Operations.
2. Check communications status with external devices if required. Refer to 4-
5 Checking I/O Status with External Devices.
Troubleshooting
HELP
When an error message is displayed on the screen, refer to 7-4 Terminology.
HELP
If you have a question, refer to 7-3 FAQ.
HELP
If you don’t understand a term, refer to 7-4 Terminology.