Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 848 / 999

6-1-(13)
Parallel Interface Section 6-1
Inputting Measurement Triggers to STEP Signal
Example: When Num. of delays is Set to 2
CHECK
The functions of the I/O signals are the same as when output control is set to
None.
Switching Scenes or Scene Groups
Output Signals
Input Signals: Switching the Scene
BUSY
OR
DO
GATE
RUN
OFF
ON
OFF
ON
OFF
ON
(1) (2) (3) (4)
(5)
Enter Run Mode Exit Run Mode
STEP input
Measuring
STEP input STEP input STEP input STEP input
Overall judgement
for (1) Overall judgement
for (2) Overall judgement
for (3) Overall judgement
for (4)
Result for
(1) Result for
(2) Result for
(3) (No results output)
Gate ON
delay Gate ON
time
BUSY
DI7
DI0 to 6
Executing command
Exit Run Mode Enter Run Mode
RUN
OFF
ON
OFF
ON
OFF
ON
Signal Function
RUN ON while the Controller is in Run Mode.
BUSY Indicates that the Controller is switching scenes or scene groups. Do not
input the next command while the BUSY signal is ON. If another command
is input while the BUSY signal is ON, either the operation being performed
or the command that was input may not be properly executed.
Signal Function
DI0 to
DI4 Set the scene number (0 to 31).
DI5 ON