Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 905 / 999

6-2-(55)
Normal Serial Interface Section 6-2
Density Defect (Measurement Data)
Note The upper left and lower right coordinates of the calculated measurement
region will be output whenever Defect (Variable Box) is set for any of the
regions 0 to 7. These coordinates will be output in pixels regardless of the set-
ting for calibration.
Density Defect (Settings Data)
Data Details
Measure-
ment
data 0 Judgement result
-2: Not measured.
-1: NG
0: OK
1 Region 0 Judgement result
2 Region X 1 (See note.)
3 Region Y 1 (See note.)
4 Region X 2 (See note.)
5 Region Y 2 (See note.)
6 Large defect
7 Small defect
8 Max. density
9 Min. density
10 Deviation
11 Large defect position X
12 Large defect position Y
13 Small defect position X
14 Small defect position Y
15 Deviation position X
16 Deviation position Y
17 Large defect reference position X
18 Large defect reference position Y
19 Small defect reference position X
20 Small defect reference position Y
21 Deviation reference position X
22 Deviation reference position Y
23 Region 1 Judgement result
to ... (Same as for region 0)
155 Region 7 Judgement result
to ... (Same as for region 0)
176 Deviation reference position Y
Data Details
Settings
data 180 Measurement image
0: Image 0
1: Image 1
181 Coordinate mode
0: After scroll, calibration OFF
1: Before scroll, calibration OFF
2: After scroll, calibration ON
3: Before scroll, calibration ON