Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 866 / 999

6-2-(16)
Normal Serial Interface Section 6-2
Example
This example shows how to display the image in memory number 8.
Input DISPIMG 8 Delimiter
Output OK Delimiter
6-2-2-6 EXIT
Function
Ends the TELNET connection for Ethernet communications and disconnects
the line.
Input
EXIT Delimiter
Output
Command executed correctly: None (Exits normally)
Command not executed correctly: ER Delimiter
CHECK
This function can be used only when using an Ethernet connection.
6-2-2-7 IMGLOAD: Image Load
Function
Loads image data from an external device.
Input
IMGLOAD <Memory number> Delimiter
The memory number (0 to 35) specifies the destination for the image data
being loaded from the external device.
Output
Command executed correctly: OK Delimiter
Command not executed correctly: ER Delimiter
CHECK
The data transfer is performed with XMODEM (-CRC or SUM) or ZMODEM
protocol. (The XMODEM (-1K) protocol is not supported.)
The Controller sends the character string “READY” to the external device
when the Controller has completed preparations.
Example
This example loads image data from the external device to memory 2.
Input IMGLOAD 2 Delimiter
Output OK Delimiter
6-2-2-8 IMGLOADM: Image Load Memory Card
Function
Loads image data from a Memory Card.
Input
IMGLOADM <Memory number> <Filename> Delimiter
• The memory number (0 to 35) specifies the destination for the image data
being loaded from the Memory Card.
• Specify the drive (C0 or C1) at the beginning of the file name.
• Specify the absolute path from the root directory.
• Add the filename extension.BMP to the filename.