Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 590 / 999

2-25-(7)
Labeling Section 2-25
The Measurement Conditions Settings Screen will be displayed.
2. Change the settings.
The settings will be registered and the screen in (1.) will return.
CHECK
Outside Trimming
Select Outside trimming when there is a white-pixel area inside the mea-
surement region that is not to be measured.
CHECK
Filling Up Holes
Use the Filling up holes setting to specify how areas of black pixels con-
tained inside donut-shaped areas of white pixels are processed. If select-
ed, the black pixels will be processed as white pixels.
Measurement conditions
End
Area :
[ 0.000 :
247808.000 ]
Outside trimming : OFF
Filling up holes : OFF
Sort :
Area descending order
Label No. : [ 0]
Outside triming: ON
Input image
Goal: To find the position
and area of this label
Measurement
region
The area outside the measurement
region changes to white pixels.
(The whole input image area is used
for measurement.)
The position and the size of the middle label
will be found if the following conditions are set:
Sort conditions: Area, ascending order
Label number: 1
Hole filling: ON
Input image
Measurement target