2-14-(24)
Density Defects
Section 2-14
Example: Inspecting Whether or Not the Measurement Object Is Always
in the Same Position
Display a measurement object in the correct position, detect a mark, and reg-
ister that position as the reference position.
CHECK
The reference value can be changed to enable the following function.
Inspecting Positions from a Specified Point
Once a mark has been detected in the image currently displayed, the refer-
ence position is changed to an suitable point. Position inspection can be per-
formed by calculating the difference between this reference position and the
measurement position.
1.
Select Reference registration.
A display cursor will appear at the position where a large defect was found.
Register the detected mark as the reference position.
Reference position (changed to a suitable point)
Measurement position
(mark detected as a defect)
Region0(Defect(var.box))
Measurement conditions
Left edge
Upper edge
Right edge
Lower edge
Reference registration
Judgement conditions
Detailed conditions
Clear
251,184
Reference registration
ENT:Set :Move
Measurement region
Reference position for large defect
Содержание F250-UME
