Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 925 / 999

6-2-(75)
Normal Serial Interface Section 6-2
Pattern Inspection (Settings Data)
Note If these settings are changed, one rectangular region will be set and any previ-
ously drawn figures will be deleted. This is true for regions 1 to 63 as well.
CHECK
Only the allocations for region 0 are listed here. Refer to the allocations for
region 0 to calculate the numbers for regions 1 to 63.
Data Details
Settings
data 512 Accuracy
0: Normal
1: Precise
513 Verification
0: ON
1: OFF
514 Candidate level (0 to 99)
515 Coordinate mode
0: After scroll, calibration OFF
1: Before scroll, calibration OFF
2: After scroll, calibration ON
3: Before scroll, calibration ON
516 Region 0 Model position upper left X (0 to 511) (See note.)
517 Model position upper left Y (0 to 483) (See note.)
518 Model position lower right X (0 to 511) (See note.)
519 Model position lower right Y (0 to 483) (See note.)
520 Model reference position X (0 to 511)
521 Model reference position Y (0 to 483)
522 Search region upper left X (0 to 511)
523 Search region upper left Y (0 to 483)
524 Search region lower right X (0 to 511)
525 Search region lower right Y (0 to 483)
526 Correlation upper limit (0 to 100)
527 Correlation lower limit (0 to 100)
528 Position X upper limit (-9,999.999 to 9,999.999)
529 Position X lower limit (-9,999.999 to 9,999.999)
530 Position Y upper limit (-9,999.999 to 9,999.999)
531 Position Y lower limit (-9,999.999 to 9,999.999)
532 Region 1 Model position upper left X (0 to 511) (See note.)
to ... (Same as for region 0)
1524 Region 63 Model position upper left X (0 to 511) (See note.)
to ... (Same as for region 0)
1539 Position Y lower limit (-9,999.999 to 9,999.999)