Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 804 / 999

5-(6)
Screen Display and Monitor Section 5-3
5-3-2 Measurement Screen Settings
Set the items below to determine the information displayed in Run Mode and
Monitor Mode. The display settings made here will be reflected in all scenes.
CHECK
Scene/Mode
Even if Scene/Mode is set to not be displayed, the scene or mode can be dis-
played temporarily by pressing the ENT Key. However, measurement cannot
be performed while the scene or mode is being displayed this way. Press the
ESC Key again to turn OFF the display.
1. Enter System mode and select Display.
SeeAlso
Refer to
(QWHULQJ6\VWHP0RGH
.
The Display Settings/Monitor/Designate Colors/Make Colors Menu will be
displayed.
2. Select Display settings.
1.Fine matching
Judge : NG
Quantity : 1
Area : 12
Gravity X :290.000
Gravity Y :280.000
0.Scn 0 MON NG 67ms
Image 0 freeze
Scene/Mode
Select whether or not to display
the scene and mode.
Overall Judgement
Select whether or not to display the overall judgement.
Processing Time
Select whether or not to display the processing
time.
Display Image
Select which image to display, the image stored
at Image 0 or the image stored at Image 1.
Display Results
Select whether or not to display detailed measurement results, e.g., detailed results
for each unit.
Image Status
Select the type of image to display.
Image Size
Select whether to display a full-screen or
reduced image.
Image Type
Select whether or not to display these items.
Character size
Display settings
Monitor
Designate colors
Make colors