Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 475 / 999

2-21-(6)
QUEST Character Verification Section 2-21
2. Place the cursor on the level and use the Left and Right Keys to change
the level to between 0 and 10.
Right Key: Increases the value by one.
Left Key: Decreases the value by one.
CHECK
The higher the level, the narrower the character lines in the image. Adjust
the level until the lines start to disappear. The higher the level, the longer
the processing time.
3. Select OK.
The settings will be registered and the screen in (1.) will return.
STEP 3: Setting Binary Levels
The QUEST OCV processing item converts density images to binary images
and performs extraction on the binary images. The binary level set here is
enabled only when the binary method is set to manual. Adjust the binary level
so that the characters for verification are displayed as white pixels.
CHECK
When Binary Method Is Set to Automatic
Once measurement has been performed, enter this screen to display and
check the image that was converted to binary using the automatically set
binary levels.
1. Select Binary.
Shading
Level:[ 8 ]
OK
Extract conditions
K B - 6 5 7 6 2
0 1 . 1 1. 0 7
Compensate image
Shading
Binary
Extract method
Dilate level
Noise conditions