Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 939 / 999

6-2-(89)
Normal Serial Interface Section 6-2
Labeling (Settings Data)
Note If these settings are changed, one rectangular region will be set and the previ-
ously drawn figures will be deleted.
Data Details
Settings
data 31 Measurement image
0: Image 0
1: Image 1
32 Coordinate mode
0: After scroll, calibration OFF
1: Before scroll, calibration OFF
2: After scroll, calibration ON
3: Before scroll, calibration ON
33 Measurement region Upper left X (0 to 511) (See note.)
34 Upper left Y (0 to 483) (See note.)
35 Lower right X (0 to 511) (See note.)
36 Lower right Y (0 to 483) (See note.)
37 Binary level Upper limit (0 to 255)
38 Lower limit (0 to 255)
39 Reverse binary level
0: Not reversed
1: Reversed
40 Area Upper limit (0.000 to 9,999,999.999)
41 Lower limit (0.000 to 9,999,999.999)
42 Filling up holes
0: OFF
1: ON
43 Sort
0: Area descending 1: Area ascending
2: X gravity descending 3: X gravity ascending
4: Y gravity descending 5: Y gravity ascending
44 Outside trimming
0: OFF
1: ON
45 Label number (0 to 2,499)
46 Number of labels Upper limit (0 to 2,500)
47 Lower limit (0 to 2,500)
48 Area Upper limit (0.000 to 9,999,999.999)
49 Lower limit (0.000 to 9,999,999.999)
50 Gravity X Upper limit (-9,999.999 to 9,999.999)
51 Lower limit (-9,999.999 to 9,999.999)
52 Gravity Y Upper limit (-9,999.999 to 9,999.999)
53 Lower limit (-9,999.999 to 9,999.999)