Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 932 / 999

6-2-(82)
Normal Serial Interface Section 6-2
Rotation Positioning (Settings Data)
Note If these settings are changed, one rectangular region will be set and any previ-
ously drawn figures will be deleted. This is true for regions 1 to 7 as well.
CHECK
Only the allocations for region 0 are listed here. Refer to the allocations for
region 0 to calculate the numbers for regions 1 to 7.
Data Details
Settings
data 72 Rotation range
0: None 1:
–
2
•
2:
–
5
•
3:
–
8
•
4:
–
10
•
5:
–
15
•
6:
–
30
•
7:
–
45
•
8:
–
60
•
9:
–
90
•
10: All angles
73 Skipping angle
0: 1
•
1: 2
•
3: 5
•
4: 6
•
5: 10
•
6: 15
•
7: 20
•
8: 30
•
74 Accuracy
0: Normal
1: Precise
75 Verification
0: ON
1: OFF
76 Candidate level (0 to 99)
77 Coordinate mode
0: After scroll, calibration OFF
1: Before scroll, calibration OFF
2: After scroll, calibration ON
3: Before scroll, calibration ON
78 Region 0 Model position upper left X (0 to 511) (See note.)
79 Model position upper left Y (0 to 483) (See note.)
80 Model position lower right X (0 to 511) (See note.)
81 Model position lower right Y (0 to 483) (See note.)
82 Model reference position X (0 to 511)
83 Model reference position Y (0 to 483)
84 Search region upper left X (0 to 511)
85 Search region upper left Y (0 to 483)
86 Search region lower right X (0 to 511)
87 Search region lower right Y (0 to 483)
88 Correlation upper limit (0 to 100)
89 Correlation lower limit (0 to 100)
90 Position X upper limit (-9,999.999 to 9,999.999)
91 Position X lower limit (-9,999.999 to 9,999.999)
92 Position Y upper limit (-9,999.999 to 9,999.999)
93 Position Y lower limit (-9,999.999 to 9,999.999)
94 Angle upper limit (-360.000 to 360.000)
95 Angle lower limit (-360.000 to 360.000)
96 Region 1 Model position upper left X (0 to 511) (See note.)
to ... (Same as for region 0)
204 Region 7 Model position upper left X (0 to 511) (See note.)
to ... (Same as for region 0)
221 Angle lower limit (-360.000 to 360.000)